MFinity Wheel 9H Nano-Ceramic Coating (2 Years)

White Cherry Scent

Preserve is a 20% ceramic (SiO2) based waterless wash Nano ceramic coating spray designed to provide maximum protection for all-ceramic coated & non-ceramic coated surfaces. Preserve cleans and adds a slicker and super hydrophobic effect that lasts up to four months on coated surfaces and up to 2 months on non-coated surfaces.  Preserve can be used on any nano-ceramic coating brand that has previously been installed. 

• Hydrophobic effect
• Acts as a stand-alone coating on uncoated surfaces
  
• Enhances the color & finish
• Extends the lifespan of nano ceramic coating
• Less maintenance

Application Instructions

Prior to application, make sure all areas to be treated are free of large dirt particles or grit.  For best results, apply on a cool surface, out of the sun.  Simply spray a generous amount of Preserve on the surface, fold a microfiber towel in fourths, and lightly wipe in straight lines to remove dirt.  Alternate to a clean side of the towel when used section gets too dirty.  To attain a streak-free, slick finish after all dirt is removed, use a fresh dry towel to buff away any residue. 

Preserve will start to cure within 20 minutes.  Allow product to cure & harden for 12-24 hours to achieve the longest possible protection.  Every time you need to clean or detail - Preserve it. 

Disclaimer

MFinity makes no expressed or implied warranty & accepts no responsibility for any direct or indirect damages since the seller has no control over handling or use once sold. 

Mfinity Ceramic Coating for Vinyl Wrap is great for those looking to protect and enhance their vehicle's vinyl wrapped surface. MFinity Wrap can remain durable for up to 2 years. Wrap will make cleaning easier and will protect from contaminants and ultraviolet damage. Like all MFinity products, Wrap is very user-friendly.  This coating leaves matte vinyl with a dulled appearance while enhancing gloss finishes. 

• Super-hydrophobic effect
• Reduces orange peel
• UV resistant & weather resistant
• Enhances the color & finish
• Extends the lifespan of the film 
• Less maintenance

A 50 ML bottle can coat 4 to 7 sedans with a gloss finish wrap, 3 to 5 sedans with a satin finish wrap, or 2 to 3 sedans with a matte finish wrap. 

Safety Instructions: 
1. Keep out of reach of children
2. Store at a cool dry place (<75 ºF)
3. Don't Mix with other products
4. Use a respirator and gloves during application

Application Instructions 

1. Prepare the surface of your vehicle. Go over the surface with denatured alcohol to remove any residual oils.  
2. Use a MFinity Applicator block with a Mfinity Microsuede Applicator wrapped around or the MFinity Pro Microfiber Applicator.
3. Shake the product well.  Apply 6 to 8 drops to the applicator.  Coat the entire pad so it is dampened with the coating.
4. Coat the entire panel in horizontal and vertical strokes.  Make sure to coat the entire surface.   
5. After 60 seconds smooth over the surface with a clean microfiber cloth using the same application technique and light, even pressure to remove any residual coating 
6. Repeat step 5 after approximately 10 seconds with a second clean MFinity microfiber cloth to smooth out the surface. 
7. Let cure for 30 minutes or less before next coating 
8. If and when applying a second coat, use 2 - 3 drops of MFinity Wrap on the applicator pad.
9. Wrap will harden within 8 - 12 hours. However, full cure time is 3 to 4 days depending on weather conditions and temperature. 
10. Wait at least 7 days after coating the surface before exposure to water, dirt, cleaners, or any other contaminants. Failure to do so may result in streaking and or staining.

View our tutorial on how to apply ceramic coating to your vehicle.

Disclaimer 

MFinity makes no expressed or implied warranty & accepts no responsibility for any direct or indirect damages since the seller has no control over handling or use once sold.

Prepare is a heavy-duty, professional-strength, all surface cleaning agent. This product is specifically designed to aid in the removal of wax, oil, silicone, bugs, and other residues. Eliminating these contaminant layers is crucial for the successful application of vinyl wraps, paint protection, and ceramic coatings. Prepare’s advanced lubrication properties give the results of a smooth surface - free of marring - ideal for prepping any surface.

WARNING: KEEP OUT OF REACH OF CHILDREN.

Always read instructions before use. May be harmful if swallowed. May cause skin & eye irritation. If swallowed please contact the poison control center or physician immediately. In case of eye contact, immediately flush with water, remove any contact lenses, continue flushing with water for 10 minutes. If irritation continues, acquire medical advice/attention.

MFinity and MetroRestyling make no expressed or implied warranty & accept no responsibility for any direct or indirect damages as neither, MFinity nor MetroRestyling, have control over how this product is handled once sold.

Safety Instructions:
1. Keep out of the reach of children
2. Store at a cool dry place (<75 degrees Ferenheight)
3. Don't Mix with other products
4. Use a respirator and gloves during application

Includes: One 16oz bottle

Application Instructions

Prior to application, make sure all areas to be treated are free of large dirt particles or grit.  For best results, apply on a cool surface, out of the sun.  Simply spray a generous amount of Prepare on the surface, and begin to wipe all dirt and contaminants away.  Alternate to a clean side of the towel when the used section gets too dirty. Spray a light amount of isopropyl alcohol and use a fresh clean towel to buff away any remaining residue.

Disclaimer

MFinity makes no expressed or implied warranty & accepts no responsibility for any direct or indirect damages since the seller has no control over handling or use once sold. 

MFinity Supreme 9H Nano-Ceramic Protective Paint Coating for painted surfaces is our flagship nano-ceramic protectant. Supreme can remain durable for 5 years. Supreme uses advanced nano-ceramic technology, giving it a high temp rating and self-cleaning features. Like all MFinity products, Supreme is very user-friendly. Supreme is the real deal if you're looking for the best in ceramic coating.

Uses

Supreme was formulated to be used to protect painted surfaces.

• 9H hardness
• Thermal resistant up to 1500°F
• UV resistant
• Chemical resistant
• Scratch-resistant
• Super-hydrophobic effect
• Prevents oxidation and corrosion
• Self-cleaning

One bottle of MFinity Supreme can coat 3 to 5 sedans.  

Safety Instructions:
1. Keep out of reach of children
2. Store at a cool dry place (<75 ºF)
3. Don't Mix with other products
4. Use a respirator and gloves during application

Application Instructions

1. Prepare the surface of your vehicle. Go over the surface with denatured alcohol to remove any residual oils.  
2. Use a MFinity Applicator Block by wrapping it with a MFinity Microsuede or MFinity Pro Microfiber Applicator
3. Shake the product well.  Apply 6 to 8 drops to the applicator.  Coat the entire pad so it is dampened with the coating.
4. Coat the entire panel in horizontal and vertical strokes.  Make sure to coat the entire surface.  
5. After the initial application, smooth over the surface after 60 seconds with a clean microfiber cloth using the same application technique and light, even pressure to remove any residual coating 
6. Repeat step 5 after approximately 10 seconds, with a second clean MFinity microfiber cloth to smooth out the surface. 
7. Let cure for 30 minutes or less before next coating 
8. If and when doing a second coating, only use two drops of MFinity Supreme on the applicator
9. Supreme will harden within 8 - 12 hours. However, full cure time is 3 to 4 days depending on weather conditions and temperature.
10. Wait at least 7 days after coating the surface before exposure to water, dirt, cleaners, or any other contaminants. Failure to do so may result in streaking and or staining.

Disclaimer 

MFinity makes no expressed or implied warranty & accepts no responsibility for any direct or indirect damages since the seller has no control over handling or use once sold.