ceramic coating for plastic
ceramic coating for plastic
ceramic coating for plastic
ceramic coating for plastic

MFinity Total 9H Nano-Ceramic Coating for Plastic (3 Years)

Regular price $119.00 Sale price $109.00

Mfinity's Ceramic Coating for Plastic is a nano-ceramic protectant that can effectively coat the majority of a vehicle. Total can remain durable for 3 years. Like all MFinity products, Total is very user-friendly. This product will not leave any harsh chemicals behind on your treated surface. 

Uses

Total can be used to protect plastic, hard rubber, aluminum, paint, wheels, and chrome surfaces.

  • 9H hardness
  • Thermal resistant from (-31°F - 1500°F)
  • UV resistant
  • Easy to clean
  • Super-hydrophobic effect
  • Brings out depth without changing the sheen

One bottle of MFinity Total can coat 3 to 6 sedans. 

Safety Instructions:
1. Keep out of reach of children
2. Store at a cool dry place (<75 ºF)
3. Don't Mix with other products 
4. Use a respirator and gloves during application

Application Instructions

How to Apply 9H Nano Ceramic Coating

  1. Prepare the surface of your vehicle. Go over the surface with denatured alcohol to remove any residual oils. 
  2. Use a MFinity Applicator Block with a MFinity Microsuede wrapped around or MFinity Pro Microfiber Applicator.
  3.  Shake the product well.   Apply 6 to 8 drops on the applicator.  Coat the entire pad, so it is dampened with the coating.
  4. Coat the entire panel in horizontal and vertical strokes.  Make sure to coat the whole surface.  
  5. After the initial application, smooth over the surface after 60 seconds with a clean microfiber cloth using the same application technique and light, even pressure to remove any residual coating. 
  6. Repeat step 5 after approximately 10 seconds, with a second clean MFinity microfiber cloth to smooth out the surface. 
  7. Let cure for 30 minutes or less before the next coating 
  8. If and when doing a second coating, only use two drops of MFinity Total on the applicator
  9. Total will harden within 8 - 12 hours. However, complete cure time is 3 to 4 days depending on weather conditions and temperature. 
  10. Wait at least 1-2 days after coating the surface before exposure to water, dirt, cleaners, or other contaminants. Failure to do so may result in streaking and or staining. 
Disclaimer 

MFinity makes no expressed or implied warranty & accepts no responsibility for any direct or indirect damages since the seller has no control over handling or use once sold.

Customer Reviews

Based on 8 reviews Write a review

Application

  • Apply Coatings in a dust free environment.
  • Due to rapid hardening, it is recommended to apply in smaller surface areas rather than one large section.
  • Ensure that you are using clean microfiber cloths for each step, and do not reuse suede applicators.
  • Make sure to keep the coated vehicle out of wet conditions while curing. 

Maintenance

  • When maintaining and cleaning the vehicle, use a neutral PH soap to ensure longevity. 
  • Only use touchless washes on your ceramic coated surfaces. 
  • There is no need to wax the surface of your vehicles after coating has been applied. 

Product Storage

  • Store all coatings in a cool, dry place. 
  • Shelf life for an unopened bottle is 2 years. 
  • Use within 6 months after opening. 
  • Wipe drip tip after use and seal tightly to prevent clogging. 
  • Do not refrigerate or freeze ceramic coatings. 

WARNING: KEEP OUT OF REACH OF CHILDREN. USE IN WELL VENTILATED AREAS ONLY!

Always read instructions before use. May be harmful if swallowed. May cause skin & eye irritation. If swallowed please contact the poison control center or physician immediately. In case of eye contact, immediately flush with water, remove any contact lenses, continue flushing with water for 10 minutes. If irritation continues, acquire medical advice/attention.